419-318-4822

Sale!

Shark HD510®REFURBISHED / OPEN BOX

From: Original price was: $3,999.99.Current price is: $3,299.99.

Shark HD510® #10022;

#10022;

Vectric VCarve Desktop Software #20031;

#20031;

Vectric Vcarve Pro Software #20030;

#20030;

SHARK CNC TOUCH PLATE #20141;

#20141;

TOUCH PLATE HOLDER #21230;

#21230;

5 PIECE FENCE KIT #21240;

#21240;

6PC CNC STARTER BIT SET #20119;

#20119;

HD510 SPOIL BOARD KIT #20180;

#20180;

SHARK HD DUST BOOT #20170;

#20170;

BIT SAVER CLAMPS 2PK #200197;

#200197&;

SPECIAL ACC BUCKET BUNDLE - CLICK FOR DETAILS #20385;

#20385;

Price including  any optional accessories selected

Share this product:

SKU 10022D-R Category Tags , , , , ,

Product Details

IMPORTANT REFURBISHED MACHINE INFORMATION

Refurbished units may be initially rejected by our QC department and sent back through the line to be reworked as time allows. Units may not be cosmetically pristine, they may contain minor scratches or blemishes, but are in perfect working order.  Refurbished units carry a 1 year limited warranty and U.S. based technical support.

Refurbished units are sold without design software, however they are compatible with VCarve Desktop or VCarve pro which can be purchased separately

NOTE: This unit is exempt from any additional discounts or rebate promotions offered through Next Wave CNC or any of it’s affiliates. 

Specs

  • Dimensions: 36-1/4” W x 38” L x 24-1/2” H
  • Table dimensions: 28” x 36”
  • XYZ travel: 25” x 25” x 7”
  • X & Y homing capability
  • Linear guides and bearings on the gantry
  • Anti-backlash, wear-compensated leadscrews on all axis
  • Interlocking rigid aluminum table with virtually unlimited clamp positioning
  • Aluminum gantry backplate for heavy machining capabilities.
  • Aluminum router mounting clamp
  • Steel encased gantry legs for increased rigidity
  • Automatic router on and off control
  • USB interface
  • Operates on 110/115 V – 15amp circuit required
  • Made in the USA

Includes

  • Virtual Zero Unlimited, $149 value, this patented Next Wave exclusive software allows you to map the surface of your material by taking an unlimited number of reference points. The program then uses these points to auto-adjust the G-code to conform to the actual surface of your material. This eliminates problems caused by a warped or bowed work piece and allows you to maintain a constant cutting depth on projects that other machines would not be able to handle.
  • Ready2Control, a computer control panel software.
  • 2 hold down Clamps
  • 1 v-bit for carving
  • One year factory warranty
  • U.S. based technical support
  • Colored touch screen pendant controller with USB interface
  • Compatible with the following routers (sold separately):
    • Bosch 1617 and 1618
    • Porter-Cable 890 Series
    • DeWalt 610, 616, 618
    • Any router with 3.5″ motor diameter

Contact Next Wave CNC to learn more about the Shark HD510 and our other options. To reach our team, please call (419) 318-4822 or email support@nextwavecnc.com.